Facebook Pixel

We recommend yearly brake inspections for your Ford Focus. Brake inspections head off calamitous brake failure. As brakes convert the energy of motion to friction heat, they wear down. 

Rotors are circular parts attached to each wheel. Brakes work by pressing pads against the rotors. In this way, friction is generated to convert the energy of motion to heat. As they wear, pads and rotors become thinner. We replace them when they reach factory-recommended wear limits.

Other, longer-lasting parts on your Ford may need service if you have a high-mileage Focus. 

The hydraulic pressure to force the brake pads against the rotors is created at the master cylinder. This vital part is at the other end of the brake lever you push. It is filled with brake fluid; an older component may have leaking seals.

The brake lines leading from the master cylinder to the calipers are made of steel and rubber. These parts are exposed to road contamination and water. Rusted-out or dry-rotted brake lines starting to leak is a possibility that you may not know about without frequent brake inspections.

The brake pads are housed in calipers that surround the brake rotors. The calipers have pistons that respond to pressure from the master cylinder to force the pads against the rotors. These parts can leak or seize in response to exposure to harsh road conditions.

How often you need brake service depends on how fast you drive and manipulate your brakes. The large differences between drivers dictate that we accomplish frequent brake inspections. 

You will want to bring your Focus in for a brake inspection if you experience the following symptoms:

  1. Squealing sound when braking
  2. Burning smell after braking
  3. Vibration during braking 
  4. Brake warning light illuminated. 
  5. Taking more distance to stop than usual 

Brake fluid delivers master cylinder pressure to the calipers for braking action. Brake fluid soaks up much of the heat from braking, so brake fluid must have a high boiling point. Brake fade occurs when bubbles in the brake fluid from boiling make the brake pedal soft.

Brake fluid absorbs water from the air. Dated brake fluid will boil during hard braking resulting in brake fade. To avoid this condition, you need a regular drain and fill service. 

Regular brake inspections and brake fluid changes are as necessary as oil changes for your vehicle’s durability and your family’s welfare.

We have Ford Focus brake repair experts. Call us or visit our website to get a quote and book an appointment for a brake pad replacement on your Ford or any service you need.